Circuit/System Verification
WARNING: This page is about a different car, the 2016 GMC Acadia, 2016 Chevrolet Traverse, and 2016 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition ON.
- Verify the scan tool ECT Sensor parameter is between -39 to + 120°C (-38 to +248°F) and changes with engine run time.
- If not between -39 to + 120°C (-38 to +248°F) or does not change
Refer to Circuit/System Testing.
- If between -39 to + 120°C (-38 to +248°F) and changes
- If not between -39 to + 120°C (-38 to +248°F) or does not change
- All OK.