Conditions for Setting the DTC
WARNING: This page is about a different car, the 2016 GMC Acadia, 2016 Chevrolet Traverse, and 2016 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.
P0089
The high pressure fuel pump has exceeded it's control limits. This condition exists when the high pressure fuel pump actuator command is 0° or greater than 240° for greater than 10 s.
P00C6
The engine control module detects that the fuel rail pressure is not rising greater than 3 MPa (435 PSI) or has fallen below 2 MPa (290 PSI) during engine cranking, depending on initial pressure when cranking begins.
P228C
The actual fuel rail pressure is 3 MPa (435 PSI) less than the desired fuel rail pressure. The condition exists for greater than 10 s.
P228D
The actual fuel rail pressure is 3 MPa (435 PSI) greater than the desired fuel rail pressure. The condition exists for greater than 10 s.