LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2010 >> Traverse LT, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 517 (Engine Controls And Fuel - 3.6L (LLT) - DTC P0010 To DTC P0336) >> Diagnostic Information and Procedures >> DTC P0011, P0014, P0021, or P0024: Camshaft Position System >> Conditions for Setting the DTC

Conditions for Setting the DTC

WARNING: This page is about a different car, the 2016 GMC Acadia, 2016 Chevrolet Traverse, and 2016 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.

P0011 and P0021 

The ECM detects the difference between the desired and actual camshaft position angle is greater than 5° for greater 2.5 s.

P0014 and P0024 

The ECM detects the difference between the desired and actual camshaft position angle is greater than 5° for greater 10 s.

scientia non olet · About LEMON Manuals