Conditions for Running the DTC

WARNING: This page is about a different car, the 2016 GMC Acadia, 2016 Chevrolet Traverse, and 2016 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.

DTC P0010, P0013, P0020, P0023, P0016, P0017, P0018, P0019, P0335, P0336, P0340, P0341, P0345, P0346, P0365, P0366, P0390, and P0391 is not set.
The ignition voltage is greater than 11 V.
The engine is running.
The desired camshaft position is not changing greater than 4.5° for at least 1 s.
Both of the desired and actual camshaft position actuator values cannot be greater than 20° or less than 5°.
DTCs P0011, P0014, P0021, and P0024 run continuously when the above conditions are met.