LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2010 >> Traverse LT, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 512 (Power Steering System) >> Diagnostic Information and Procedures >> DTC C0450: Steering Assist Control Solenoid Actuator >> Component Testing

Component Testing

WARNING: This page is about a different car, the 2016 GMC Acadia, 2016 Chevrolet Traverse, and 2016 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition OFF, disconnect the harness connector at the VES actuator.
  2. Test for 5-10 ohms between the control terminals 1 and 2.
    • If not within the specified range, replace the VES actuator.
  3. Test for infinite resistance between each terminal and the VES actuator housing/case.
    • If not the specified value, replace the VES actuator.