Conditions for Running the DTC

WARNING: This page is about a different car, the 2016 GMC Acadia, 2016 Chevrolet Traverse, and 2016 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.

DTC P0010, P0016, P0017, P0018, P0019, P0335, P0336, P0340, P0341, P0345, P0346, P0365, P0366, P0390 or P0391, is not set.
The ignition voltage is greater than 11 V.
The engine is running.
The desired camshaft position is greater than 0 degrees.
The desired camshaft position is not changing greater than 4.5° for at least 1 s.
Both of the desired and actual camshaft position actuator values cannot be greater than 20 degrees or less than 5 degrees.
DTCs P05CC, P05CD, P05CE, and P05CF run continuously once the above conditions are met.