LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2010 >> Traverse LT, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 510 (Engine Controls And Fuel - 3.6L (LLT) - DTC P0340 To DTC P2635 And Diagnostic Information And Procedures) >> Diagnostic Information and Procedures >> DTC P057B-P057D: Brake Pedal Position Sensor >> Conditions for Setting the DTC

Conditions for Setting the DTC

WARNING: This page is about a different car, the 2016 GMC Acadia, 2016 Chevrolet Traverse, and 2016 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.

P057B 

ECM detects the BPP sensor signal is stuck in a range for greater than 1 s.

P057C 

ECM detects the BPP sensor voltage is less than 0.25 V greater than 1 s.

P057D 

ECM detects the BPP sensor voltage is greater than 4.75 V greater than 1 s.

scientia non olet · About LEMON Manuals