LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2010 >> Traverse LT, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 509 (Automatic Transmission - 6T75 (M7V M7X) - Repair Instructions - Off Vehicle) >> Repair Instructions - Off Vehicle >> Torque Converter and Differential Housing Assembly Assemble >> Transfer Drive Gear Assembly Installation

Transfer Drive Gear Assembly Installation

WARNING: This page is about a different car, the 2016 GMC Acadia, 2016 Chevrolet Traverse, and 2016 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: View of Transfer Drive Gear Assembly
GM2181504Courtesy of GENERAL MOTORS COMPANY
Transfer Drive Gear Assembly Installation

Callout Component Name
1 Drive Sprocket Thrust Washer
2 Front Differential Transfer Drive Gear Support Assembly
3 Front Differential Transfer Drive Gear Support Bolt M8 x 25 (Qty: 9)
CAUTION:

Refer to Fastener Caution .


Procedure 
Tighten in sequence shown.
Tighten 
10 N.m (89 lb in) plus 50 degrees ± 4 degrees.
Special Tools: 
EN 45059  Angle Meter
For equivalent regional tools, refer to Special Tools .
4 Front Differential Carrier Baffle
5 Front Differential Carrier Baffle Bolt M6 x 25
Tighten 
12 N.m (106 lb in).
scientia non olet · About LEMON Manuals