Torque Converter Fluid Seal Replacement

WARNING: This page is about a different car, the 2016 GMC Acadia, 2016 Chevrolet Traverse, and 2016 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Torque Converter Fluid Seal

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
1	Torque Converter Fluid Seal CAUTION: Support the back side of the torque converter housing while installing the seal. Install the seal until it stops moving. Applying excessive pressure to the seal once it is seated could cause damage to the torque converter housing casting. Special Tools DT 23129 Universal Seal Remover DT 49861 Seal Installer GE 6125-1B Slide Hammer with Adapter or equivalent For equivalent regional tools, refer to Special Tools .

Callout

Component Name

Torque Converter Fluid Seal

CAUTION:

Support the back side of the torque converter housing while installing the seal. Install the seal until it stops moving. Applying excessive pressure to the seal once it is seated could cause damage to the torque converter housing casting.

Special Tools

DT 23129 Universal Seal Remover
DT 49861 Seal Installer
GE 6125-1B Slide Hammer with Adapter or equivalent

For equivalent regional tools, refer to Special Tools .