Control Solenoid (w/Body and TCM) Valve Assembly Removal
WARNING: This page is about a different car, the 2016 GMC Acadia, 2016 Chevrolet Traverse, and 2016 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.
Control Solenoid (w/Body and TCM) Valve Assembly Removal
| Callout | Component Name |
|---|---|
| 1 | Control Valve Body Bolt M6 x 80 (Qty: 4) |
| 2 | Control Solenoid Valve Spring |
| 3 | Control Valve Body Bolt M6 x 65 (Qty: 2) |
| 4 | Control Valve Body Bolt M6 x 42 (Qty: 1) |
| 5 | Control Valve Body Bolt M6 x 95 (Qty: 3) |
| 6 | Control Valve Body Bolt M6 x 55 (Qty: 1) |
| 7 | Control Solenoid (w/Body and TCM) Valve Assembly |
| 8 | Control Solenoid Valve Assembly Filter Plate
CAUTION:
Use care when removing or installing the filter plate assembly. A broken or missing retaining tab may not adequately secure the filter plate to the control solenoid valve assembly, resulting in possible damage or contamination.
NOTE:
Discard the filter plate, it is not reusable. |