LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2010 >> Traverse LT, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 488 (Lighting System - Diagnostic Information And Procedures) >> Diagnostic Information and Procedures >> Rear Fog Lamps Malfunction >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2016 GMC Acadia, 2016 Chevrolet Traverse, and 2016 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition ON, observe the scan tool Rear Fog Lamp Switch parameter while pressing and releasing the rear fog lamp switch. The parameter should change between Active and Inactive.
    • If the parameter does not change between the selected states, refer to the Rear Fog Lamp Switch Malfunction.
  2. Ignition ON, command the Rear Fog Lamps ON and OFF with a scan tool. Verify the rear fog lamps turn on and off.
    • If the front fog lamps are always on or always off, refer to Rear Fog Lamps Malfunction.
scientia non olet · About LEMON Manuals