LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2010 >> Traverse LT, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 487 (Mirror System) >> Diagnostic Information and Procedures >> DTC B1722: Mirror Power Fold Circuit >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2016 GMC Acadia, 2016 Chevrolet Traverse, and 2016 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition ON.
  2. Verify the Outside Rearview Mirror-Driver moves when commanding the Mirror Fold with a scan tool.
    • If the Outside Rearview Mirror-Driver does not FOLD 

      Refer to Circuit/System Testing.

    • If the Outside Rearview Mirror-Driver does FOLD 
  3. Verify the Outside Rearview Mirror-Passenger when commanding the Mirror Fold with a scan tool.
    • If the Outside Rearview Mirror-Passenger does not FOLD 

      Refer to Circuit/System Testing

    • If the Outside Rearview Mirror-Passenger does FOLD 
  4. All OK.