LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2010 >> Traverse LT, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 481 (Power Seat System) >> Diagnostic Information and Procedures >> Power Seat Inoperative (Without Memory A45) >> Component Testing

Component Testing

WARNING: This page is about a different car, the 2016 GMC Acadia, 2016 Chevrolet Traverse, and 2016 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.

Seat Adjuster Switch Test

  1. Ignition OFF, disconnect the harness connector at the seat adjuster switch.
  2. Test for infinite resistance between each control terminal and the B+ terminal with the switch in the open position.
    • If less than the specified value, replace the seat adjuster switch.
  3. Test for less than 2 ohm between each control terminal and the B+ terminal with the switch in the closed position.
    • If greater than the specified range, replace the seat adjuster switch.
  4. Test for less than 2 ohm between each control terminal and the ground terminal with the switch in the open position.
    • If greater than the specified range, replace the seat adjuster switch.
scientia non olet · About LEMON Manuals