Circuit/System Verification
WARNING: This page is about a different car, the 2016 GMC Acadia, 2016 Chevrolet Traverse, and 2016 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition ON, observe the scan tool Memory Seat Module seat switch parameters while pressing the appropriate seat switch. The reading should change between Inactive and Active.
- If the reading does not change between the specified values, refer to the Seat Adjuster Switch Circuit Test.
- If all seat switch inputs to the MSM function normal, refer to the Seat Motor Control Circuit Test.