LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2010 >> Traverse LT, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 481 (Power Seat System) >> Diagnostic Information and Procedures >> DTC B1825, B2355, B2365, or B2375: Seat Position Sensor >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2016 GMC Acadia, 2016 Chevrolet Traverse, and 2016 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.

Ignition ON, observe all scan tool Memory Seat Module driver seat position parameters. The readings should be between 0.22 volts and 4.75 volts and change while adjusting seat positions.

scientia non olet · About LEMON Manuals