LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2010 >> Traverse LT, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 481 (Power Seat System) >> Diagnostic Information and Procedures >> DTC B1335: Device Power 3 >> Conditions for Setting the DTC

Conditions for Setting the DTC

WARNING: This page is about a different car, the 2016 GMC Acadia, 2016 Chevrolet Traverse, and 2016 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.

B1335 00 

Current out of the module does not match the current returning to the module within 5 amps.

B1335 0B 

The absolute current or an over-current has exceeded the maximum value allowed.

B1335 42 

This DTC will set if the module calibration is not programmed.

B1335 4B 

This DTC will set if the module calibration is out of range.

scientia non olet · About LEMON Manuals