Installation Procedure
WARNING: This page is about a different car, the 2016 GMC Acadia, 2016 Chevrolet Traverse, and 2016 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.
- Install the new outside door handle rod clip (1) to the latch.
- Verify the outside door handle will release the door latch.
NOTE:
When replacing the old designed outside door handle rod clip with the new designed clip (1) the anti rotation tab (2) will need to be removed.
NOTE:
When installing the outside door handle rod to latch in order to prevent outside handle lever pre-load, the outside handle shall be fully secured to the door prior to securing integral latch clip to outside handle release rod. Push upward at the bottom the rod clip.