Installation Procedure
WARNING: This page is about a different car, the 2016 GMC Acadia, 2016 Chevrolet Traverse, and 2016 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.
- Loosely install the striker with the bolts.
- Align the striker with the marks made prior to removal.
- Install the bolts, hand tighten.
- Inspect the door closing and align the striker as required. Refer to Door Lock Striker Adjustment .
- Tighten the striker bolts.
Tighten
Tighten the door striker bolts to 25 N.m (18 lb ft).
CAUTION:
Refer to Fastener Caution .