LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2010 >> Traverse LT, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 480 (Power Door Lock System And Release Systems) >> Diagnostic Information and Procedures >> Liftgate Ajar Indicator Malfunction (TB4) >> Component Testing

Component Testing

WARNING: This page is about a different car, the 2016 GMC Acadia, 2016 Chevrolet Traverse, and 2016 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.
    NOTE:

    The ajar switch contacts will be in the open position when the A23C Liftgate Latch Assembly is latched and the ajar switch contacts will be in the closed position when unlatched

  1. Ignition OFF, disconnect the harness connector at the A23C Liftgate Latch Assembly.
  2. Test for infinite resistance between the signal terminal 6 and the ground terminal 5 with the switch in the open position.
    • If not the specified value, replace the A23C Liftgate Latch Assembly.
  3. Test for less than 1 Ω between the signal terminal 6 and the ground terminal 5 with the switch in the closed position.
    • If greater than the specified range, replace the A23C Liftgate Latch Assembly.
scientia non olet · About LEMON Manuals