LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2010 >> Traverse LT, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 480 (Power Door Lock System And Release Systems) >> Diagnostic Information and Procedures >> Door Ajar Indicator Malfunction (With AXE) >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2016 GMC Acadia, 2016 Chevrolet Traverse, and 2016 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition ON, with all doors closed, observe the scan tool Left Rear Door Ajar Switch parameter and Right Rear Door Ajar Switch parameter while opening and closing the rear doors. The parameter should change between Door Closed and Door Ajar.
    • If the value does not change, refer to Rear Door Ajar Switch Malfunction.
  2. Observe the scan tool Driver Door Ajar Sw parameter and Passenger Door Ajar Sw. parameter while opening and closing the driver door and passenger door. The parameter should change between Active and Inactive.
    • If the value does not change, refer to Front Door Ajar Switch Malfunction.
scientia non olet · About LEMON Manuals