LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2010 >> Traverse LT, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 480 (Power Door Lock System And Release Systems) >> Diagnostic Information and Procedures >> DTC B396A: Liftgate Motor Power Open/Close Malfunction >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2016 GMC Acadia, 2016 Chevrolet Traverse, and 2016 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition ON, doors unlocked, transaxle in Park, verify that the power liftgate is enabled by pressing the liftgate enable/disable button on the I/P switch assembly.
  2. Open the liftgate by pressing the touchpad on the liftgate handle switch. The liftgate should release and power open.
  3. With the liftgate open, activate the power close. The liftgate should power close.
scientia non olet · About LEMON Manuals