LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2010 >> Traverse LT, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 480 (Power Door Lock System And Release Systems) >> Diagnostic Information and Procedures >> DTC B2495: Liftgate Latch Release/Cinch Malfunction >> Component Testing

Component Testing

WARNING: This page is about a different car, the 2016 GMC Acadia, 2016 Chevrolet Traverse, and 2016 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install a 20 A fused jumper wire between the control terminal 1 and 12 V. Momentarily install a jumper wire between the control terminal 3 and ground. The liftgate latch assembly should perform the CINCH or RELEASE function.
    • If the function does not perform as specified, replace the liftgate latch assembly.
  2. Reverse the jumper wires; the liftgate latch assembly should perform the RELEASE or CINCH function.
    • If the function does not perform as specified, replace the liftgate latch assembly.
scientia non olet · About LEMON Manuals