LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2010 >> Traverse LT, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 479 (Seat Heating System And Seat Cooling System) >> Diagnostic Information and Procedures >> DTC B2425 or B2430: Left/Right Seat Heater Cushion (With Memory A45, without KB6) >> Conditions for Setting the DTC

Conditions for Setting the DTC

WARNING: This page is about a different car, the 2016 GMC Acadia, 2016 Chevrolet Traverse, and 2016 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.

B2425 04, B2430 04 

The module does not detect a temperature change for up to 210 seconds.

B2425 0A, B2430 0A 

The module detects that the set point temperature has not been reached for up to 8.5 minutes.

B2425 0B, B2425 0E, B2430 0B, B2430 0E 

By measuring the current and voltage through the seat cushion heating element every 10 seconds, the seat memory control module calculates that the heating element resistance is below the minimum resistance.

B2425 0C, B2425 0D, B2430 0C, B2430 0D 

By measuring the current and voltage through the seat cushion heating element every 10 seconds, the seat memory control module calculates that the heating element resistance is above the maximum resistance.

B2425 1F, B2430 1F 

The temperature sensor voltage is erratic or change suddenly.

scientia non olet · About LEMON Manuals