Circuit/System Verification
WARNING: This page is about a different car, the 2016 GMC Acadia, 2016 Chevrolet Traverse, and 2016 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.
- Reprogram the HVAC control module. The module should successfully reprogram.
- If the module will not reprogram, replace the HVAC control module that set the DTC.
- With a scan tool, clear the DTC.
- Ignition OFF.
- Wait 60 seconds, then recheck for DTCs. DTC B1023 should not set.
- If DTC B1023 sets, replace the module.