LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2010 >> Traverse LT, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 471 (Instrument Panel System Displays And Gauges) >> Diagnostic Information and Procedures >> DTC B3567: Driver Information Center (DIC)/Head-Up Display (HUD) >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2016 GMC Acadia, 2016 Chevrolet Traverse, and 2016 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition ON.
  2. Verify the driver information center set, customization, and vehicle information change when pressing the set, customization, and vehicle information buttons.
    • If the driver information center does not change 

      Refer to Set, Customization, and Vehicle Information Switch Malfunction

    • If the driver information center changes 
  3. Verify the driver information center Trip/Fuel function changes when pressing the Trip/Fuel switch.
    • If the driver information center does not change 

      Refer to Trip/Fuel Switch Malfunction

    • If the driver information center changes 
  4. Verify that when the HUD switches (if equipped) are pressed and released the HUD scan tool parameters toggle between Active and Inactive.
    • If the parameters do not toggle between Active and Inactive 

      Refer to HUD Switch Malfunction

    • If the parameters toggle between Active and Inactive 
  5. All OK.
scientia non olet · About LEMON Manuals