LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2010 >> Traverse LT, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 471 (Instrument Panel System Displays And Gauges) >> Description and Operation >> Compass Calibration and Magnetic Variance (DIC) >> Compass Magnetic Variation Adjustment >> World Magnetic Variation Map

World Magnetic Variation Map

WARNING: This page is about a different car, the 2016 GMC Acadia, 2016 Chevrolet Traverse, and 2016 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: World Magnetic Variation Map
GM384280Courtesy of GENERAL MOTORS COMPANY
    Fig 2: Illustrating Magnetic Variation Zones
    GM9020Courtesy of GENERAL MOTORS COMPANY
  1. Locate your geographic location. Refer to the variation zone map.
  2. Turn ON the ignition with the engine OFF.
  3. Press the vehicle information button until PRESS [CHECK] TO CHANGE COMPASS ZONE displays on the DIC.
  4. Press the set/reset button to scroll through and select the appropriate variance zone.
  5. Navigate to one of the trip/fuel menu screens to view the direction of the vehicle. This will be shown in the bottom line.

If the compass needs to be calibrated, use the compass calibration procedure below.