Component Testing
WARNING: This page is about a different car, the 2016 GMC Acadia, 2016 Chevrolet Traverse, and 2016 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.
Static Test
- Ignition OFF, disconnect the harness connector at the Q46 A/C Compressor Solenoid Valve.
- Test for 7-15 Ω between B+ circuit terminal 2 and control circuit terminal 1.
- If less than 7 Ω or greater than 15 Ω
Replace the Q46 A/C Compressor Solenoid Valve
- If between 7-15 Ω
- If less than 7 Ω or greater than 15 Ω
- Test for infinite resistance between each terminal and the Q46 A/C Compressor Solenoid Valve housing/case.
- If less than infinite resistance
Replace the Q46 A/C Compressor Solenoid Valve
- If infinite resistance
- If less than infinite resistance
- All OK