Rear Side Door Upper Hinge and Lower Hinge Replacement
WARNING: This page is about a different car, the 2016 GMC Acadia, 2016 Chevrolet Traverse, and 2016 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name |
|---|---|
| 1 | Rear Side Door Hinge Upper Bolt (Qty: 2)
CAUTION:
Refer to Fastener Caution . Tighten 25 N.m (18 lb ft) |
| 2 | Rear Side Door Hinge Upper Bolt (Qty: 2) Tighten 25 N.m (18 lb ft) |
| 3 | Rear Side Door Upper Hinge
NOTE:
Check the door for proper alignment, then adjust as necessary. |
| 4 | Rear Side Door Hinge Lower Bolt
NOTE:
After installation of the replacement upper hinge, from the underside of the hinge, remove the temporary keeper pivot bolt and replace with longer permanent bolt. Tighten 25 N.m (18 lb ft) |
| 5 | Rear Side Door Hinge Lower Bolt (Qty: 2) Tighten 25 N.m (18 lb ft) |
| 6 | Rear Side Door Hinge Lower Bolt (Qty: 2) Tighten 25 N.m (18 lb ft) |
| 7 | Rear Side Door Lower Hinge
NOTE:
Check the door for proper alignment, then adjust as necessary. |