LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2010 >> Traverse LT, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 469 (Bolted Exterior Body Panels And Closures) >> Repair Instructions >> Rear Side Door Front Auxiliary Weatherstrip Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2016 GMC Acadia, 2016 Chevrolet Traverse, and 2016 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the rear door frame applique. Refer to Rear Door Frame Applique ReplacementRear Door Frame Applique Replacement (Rear) .
    2. Fig 1: Sealing Strip (Rear Door Upper)
    GM690980Courtesy of GENERAL MOTORS COMPANY
  2. Starting at the bottom of the sealing strip, pull the sealing strip away from the door pinch-weld flange.
  3. Lift upward in order to remove the upper portion of the sealing strip from the door pinch-weld flange.
  4. Remove the sealing strip from the door.
scientia non olet · About LEMON Manuals