LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2010 >> Traverse LT, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 469 (Bolted Exterior Body Panels And Closures) >> Repair Instructions >> Rear Side Door Front Auxiliary Weatherstrip Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2016 GMC Acadia, 2016 Chevrolet Traverse, and 2016 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Sealing Strip (Rear Door Upper)
    GM690980Courtesy of GENERAL MOTORS COMPANY
  1. Starting at the top of the sealing strip, insert the sealing strip tab into the door sheet metal.
  2. Position the sealing strip to the door pinch-weld flange and apply pressure in order to seat the sealing strip.
  3. Ensure that the sealing strip is fully seated against the pinch-weld flange.
  4. Install the rear door frame applique. Refer to Rear Door Frame Applique ReplacementRear Door Frame Applique Replacement (Rear) .
scientia non olet · About LEMON Manuals