Hood Replacement (Traverse)

WARNING: This page is about a different car, the 2016 GMC Acadia, 2016 Chevrolet Traverse, and 2016 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Hood (Traverse)

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Disconnect the windshield washer hose. Disconnect the hood struts.
1	Hood Hinge Bolt (Qty: 4) CAUTION: Refer to Fastener Caution . Procedure Mark the hood or hinge position in order to aid in hood installation. Tighten 22 N.m (16 lb ft)
2	Hood Procedure Remove the hood from the vehicle with the aid of an assistant. Transfer parts as needed. Adjust the hood if needed. Refer to Hood Adjustment (Traverse) .

Callout

Component Name

Preliminary Procedures

Disconnect the windshield washer hose.
Disconnect the hood struts.

Hood Hinge Bolt (Qty: 4)

CAUTION:

Refer to Fastener Caution .

Procedure
Mark the hood or hinge position in order to aid in hood installation.
Tighten
22 N.m (16 lb ft)

Hood

Procedure

Remove the hood from the vehicle with the aid of an assistant.
Transfer parts as needed.
Adjust the hood if needed. Refer to Hood Adjustment (Traverse) .