Hood Rear Weatherstrip Replacement (Traverse)
WARNING: This page is about a different car, the 2016 GMC Acadia, 2016 Chevrolet Traverse, and 2016 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name |
|---|---|
| 1 | Hood Rear Weatherstrip Push-In Retainer (Qty: 2) Procedure Using a suitable tool, carefully pull the push-in retainers to release the hood rear weatherstrip ends. |
| 2 | Hood Rear Weatherstrip Procedure The hood rear weatherstrip is held in place with 9 plastic retainers that are part of the air inlet grille. Carefully pull the weatherstrip to the right/left to release from the retainers on the air inlet grille. |