Front Fender Replacement (Enclave)

WARNING: This page is about a different car, the 2016 GMC Acadia, 2016 Chevrolet Traverse, and 2016 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Front Fender (Enclave)

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Remove the bumper fascia. Refer to Front Bumper Fascia Replacement (Enclave) . Remove the fender shipping cover. Refer to Front Fender Shipping Cover Replacement (Enclave) . Remove the headlamp. Refer to Headlamp Replacement (Enclave) . Remove the front wheelhouse rear liner. Refer to Front Wheelhouse Rear Liner Replacement (Acadia, Enclave, Traverse) . Remove the rocker panel molding. Refer to Rocker Panel Front Molding Replacement (Enclave) .
1	Front Fender Screw CAUTION: Refer to Fastener Caution .
2	Front Fender Bolt (Qty: 6) Tighten 10 N.m (89 lb in)
3	Front Fender Procedure Transfer parts as needed.