LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2010 >> Traverse LT, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 469 (Bolted Exterior Body Panels And Closures) >> Diagnostic Information and Procedures >> Hood Ajar Indicator/Message Malfunction >> Component Testing

Component Testing

WARNING: This page is about a different car, the 2016 GMC Acadia, 2016 Chevrolet Traverse, and 2016 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.

Hood Ajar Switch

  1. Ignition OFF, disconnect the harness connector at the hood ajar switch.
  2. With the switch in the hood closed position, test for infinite resistance between the ground terminal C and the signal terminal A.
    • If not infinite, replace the hood ajar switch.
  3. Test for less than 2 ohms between the ground terminal C and the signal terminal B.
    • If greater than the specified range, replace the hood ajar switch.
  4. With the switch in the hood open position, test for infinite resistance between the ground terminal C and the signal terminal B.
    • If not infinite, replace the hood ajar switch.
  5. Test for less than 2 ohms between the ground terminal C and the signal terminal A.
    • If greater than the specified range, replace the hood ajar switch.
scientia non olet · About LEMON Manuals