Circuit/System Verification
WARNING: This page is about a different car, the 2016 GMC Acadia, 2016 Chevrolet Traverse, and 2016 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition ON.
- Verify an audible click is heard or felt from cooling fan relays 1, 2, and 3 when commanding the cooling fans ON and OFF with a scan tool.
- If a click is not heard or felt at one or more of the relays
Refer to Circuit/System Testing
- If a click is heard or felt at each of the relays
- If a click is not heard or felt at one or more of the relays
- Operate the vehicle within the Conditions for Running the DTC. You may also operate the vehicle within the conditions that you observed from the Freeze Frame/Failure Records data.
- Verify the DTC does not set.
- If the DTC sets
Refer to Circuit/System Testing
- If the DTC does not set
- If the DTC sets
- All OK.