Installation Procedure
WARNING: This page is about a different car, the 2016 GMC Acadia, 2016 Chevrolet Traverse, and 2016 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.
- Install one exhaust manifold bolt (1) to the exhaust manifold.
- Install the NEW exhaust manifold gasket onto the cylinder head and bolt.
- Install the exhaust manifold (with gasket) to the catalytic converter and the cylinder head.
- Install the exhaust manifold bolts.
Tighten
Tighten the bolts to 20 N.m (15 lb ft).
- Install the exhaust manifold heat shield. Refer to Exhaust Manifold Heat Shield Replacement - Right Side .
- Install the catalytic converter. Refer to Catalytic Converter Replacement - Right Side .
CAUTION:
Refer to Fastener Caution .