LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2010 >> Traverse LT, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 464 (Exhaust System) >> Repair Instructions >> Exhaust Manifold Replacement - Left Side >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2016 GMC Acadia, 2016 Chevrolet Traverse, and 2016 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:

Refer to Exhaust Service Warning .

WARNING:

Refer to Protective Goggles and Glove Warning .

    Fig 1: Identifying Left Side Exhaust Manifold Bolts
    GM1836987Courtesy of GENERAL MOTORS COMPANY
  1. Remove the exhaust manifold heat shield. Refer to Exhaust Manifold Heat Shield Replacement - Left Side .
  2. Remove the oil level indicator. Refer to Oil Level Indicator Tube Replacement .
  3. Remove the catalytic converter. Refer to Catalytic Converter Replacement - Left Side .
  4. Remove the exhaust manifold bolts (1).
    5. NOTE:

    Do not reuse the gasket.

  5. Remove the exhaust manifold and gasket. Discard the gasket.
    6. Fig 2: Identifying Heated Oxygen Sensors & Exhaust Manifold
    GM1858130Courtesy of GENERAL MOTORS COMPANY
  6. Remove the heated oxygen sensor (1) from the exhaust manifold.
scientia non olet · About LEMON Manuals