LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2010 >> Traverse LT, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 464 (Exhaust System) >> Repair Instructions >> Catalytic Converter Replacement - Right Side >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2016 GMC Acadia, 2016 Chevrolet Traverse, and 2016 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:

Refer to Exhaust Service Warning .

WARNING:

Refer to Protective Goggles and Glove Warning .

  1. If equipped with all wheel drive (AWD), remove the transfer case. Refer to Transfer Case Assembly Replacement .
    2. Fig 1: Identifying Catalytic Converter To Exhaust Manifold Nuts
    GM1861341Courtesy of GENERAL MOTORS COMPANY
  2. Remove the exhaust flexible pipe. Refer to Exhaust Flexible Pipe Replacement .
  3. Remove the catalytic converter to exhaust manifold nuts (2).
  4. Remove the catalytic converter from the exhaust manifold.
  5. Remove and discard the catalytic converter to exhaust manifold seal (1).
scientia non olet · About LEMON Manuals