Removal Procedure
WARNING: This page is about a different car, the 2016 GMC Acadia, 2016 Chevrolet Traverse, and 2016 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.
- Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
- Support the transmission with a transmission jack.
- Remove and DISCARD the transmission mount nuts (1, 2).
- Remove the transmission mount bracket bolts (1, 2).
- Using the transmission jack, lift the transmission just enough to gain clearance for tilting the transmission mount.
- Remove the transmission mount bracket bolt (3).
- Remove the transmission mount (2) and bracket (1) from the vehicle.