LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2010 >> Traverse LT, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 459 (Interior Trim And Interior Paneling) >> Repair Instructions >> Rear Side Door Upper Garnish Molding Replacement (Enclave)

Rear Side Door Upper Garnish Molding Replacement (Enclave)

WARNING: This page is about a different car, the 2016 GMC Acadia, 2016 Chevrolet Traverse, and 2016 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Rear Side Door Garnish Molding (Enclave)
GM1892429Courtesy of GENERAL MOTORS COMPANY
Callout Component Name
Preliminary Procedure 
Remove the rear side door trim panel. Refer to Rear Side Door Trim Panel Replacement (Enclave) .
1 Rear Side Door Upper Garnish Molding Retainer (Qty: 2)
TIP:  Use a door trim panel removal tool or equivalent to aid in the removal of the retainer.
2 Rear Side Door Upper Garnish Molding
TIP:  Pull outward starting at the front and moving slowly rearward to remove the molding.