LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2010 >> Traverse LT, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 459 (Interior Trim And Interior Paneling) >> Repair Instructions >> Front Side Door Garnish Molding Replacement (Enclave)

Front Side Door Garnish Molding Replacement (Enclave)

WARNING: This page is about a different car, the 2016 GMC Acadia, 2016 Chevrolet Traverse, and 2016 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Front Side Door Garnish Molding (Enclave)
GM1892362Courtesy of GENERAL MOTORS COMPANY
Callout Component Name
Preliminary Procedure 
Remove the front side door trim panel. Refer to Front Side Door Trim Panel Replacement - Left Side (Enclave) , or Front Side Door Trim Panel Replacement - Right Side (Enclave) .
1 Front Side Door Garnish Molding Retainer
TIP:  Use a door trim panel removal tool or equivalent to aid in the removal of the retainer.
2 Front Side Door Garnish Molding
TIP:  Pull outward starting at the front and moving slowly rearward to remove the molding.
3 Front Side Door Garnish Molding Retainer Clip