LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2010 >> Traverse LT, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 458 (Seat Hardware, Seat Trim, And Upholstery) >> Repair Instructions >> 3rd Row Seat Back Panel Replacement

3rd Row Seat Back Panel Replacement

WARNING: This page is about a different car, the 2016 GMC Acadia, 2016 Chevrolet Traverse, and 2016 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: 3rd Row Seat Back Panel
GM1831405Courtesy of GENERAL MOTORS COMPANY
Callout Component Name

Preliminary Procedures

  1. Remove the child seat bracket trim cover. Refer to 3rd Row Seat Child Seat Bracket Replacement .
  2. Remove the 3rd row seat pull strap. Refer to 3rd Row Seat Pull Strap Replacement .
  3. Unzip the side zippers of the rear number 2 back trim cover.
  4. Flip the carpet of the back trim over to expose the panel.
1 Rear Seat No. 2 Back Cushion Panel
TIP:  Using a trim tool or equivalent, pull rearward on the seat back cushion panel to remove.