LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2010 >> Traverse LT, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 455 (Seat Belt System) >> Diagnostic Information and Procedures >> Seat Belt Indicator Malfunction - Passenger >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2016 GMC Acadia, 2016 Chevrolet Traverse, and 2016 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition ON, observe the scan tool Passenger Seat Belt Switch parameter while buckling and unbuckling the passenger seat belt. The parameter should change between Buckled and Unbuckled.
    • If the parameter does not cycle between the specified values, refer to Passenger Seat Belt Switch Circuit Malfunction.
  2. Ignition ON, while sitting in the passenger seat with the seat belt unbuckled, verify the passenger seat belt warning indicator is illuminated on the inflatable restraint I/P module indicator.
    • If the indicator is not illuminated, refer to Passenger Seat Belt Indicator Circuit Malfunction.
scientia non olet · About LEMON Manuals