LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2010 >> Traverse LT, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 454 (Battery, Charging System And Starting System) >> Diagnostic Information and Procedures >> Starter Noise Diagnosis >> Circuit/System Testing

Circuit/System Testing

WARNING: This page is about a different car, the 2016 GMC Acadia, 2016 Chevrolet Traverse, and 2016 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the flex plate inspection cover.
  2. Inspect the flex plate for the following:
    • Loose flex plate bolts
    • Chipped gear teeth
    • Missing gear teeth
    • Bent flex plate
    • If not within specifications, secure the flex plate bolts or replace the flex plate.
    • If all inspections were within specification, replace the starter motor.
scientia non olet · About LEMON Manuals