Installation Procedure

WARNING: This page is about a different car, the 2016 GMC Acadia, 2016 Chevrolet Traverse, and 2016 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Rear Side Door Window Front Channel (Acadia/Traverse)

Courtesy of GENERAL MOTORS COMPANY

NOTE:

Ensure that the upper and lower weatherstrip channels are connected before installing the weatherstrip.

Install the rear side door window front channel (1) to the door.
Press the weatherstrip into the channel (1).

CAUTION:

Refer to Fastener Caution .

Install the bolt (1) that retains the rear side door window front channel.
Tighten

Tighten nut to 9 N.m (80 lb in).
Roll the window up and down to ensure proper operating be install the door trim.