LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2010 >> Traverse LT, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 448 (Fixed And MOVEABLE Window System) >> Repair Instructions >> Front Side Door Window Inner Weatherstrip Replacement (Acadia/Traverse) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2016 GMC Acadia, 2016 Chevrolet Traverse, and 2016 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Front Side Door Window Inner Weatherstrip
    GM1847490Courtesy of GENERAL MOTORS COMPANY
    IMPORTANT:

    It is Not necessary to remove the inner door trim panel.

    IMPORTANT:

    Install the weatherstrip/run channel by fitting both corners to the upper door frame and then pushing inward on the sides.

  1. Position the window weatherstrip to the door starting in the upper corners.
  2. Firmly seat the window weatherstrip to the door, working out in both directions.
  3. Inspect the window to ensure the weatherstrip is properly positioned.
  4. Inspect the window for proper operation.
  5. Close the door.
scientia non olet · About LEMON Manuals