LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2010 >> Traverse LT, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 448 (Fixed And MOVEABLE Window System) >> Diagnostic Information and Procedures >> Power Windows Malfunction (With AXE) >> Component Testing

Component Testing

WARNING: This page is about a different car, the 2016 GMC Acadia, 2016 Chevrolet Traverse, and 2016 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.

Passenger or Rear Window Motor

  1. Ignition OFF, disconnect the harness connector at the appropriate window motor.
  2. Install a 25A fused jumper wire between one of the control terminals and 12V. Momentarily install a jumper wire between the other control terminal and ground. Reverse the jumper wires at least two times, the window motor should perform the UP and DOWN functions.
    • If it does not perform as specified, replace the window motor.