LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2010 >> Traverse LT, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 441 (Lighting System - Repair Instructions) >> Repair Instructions >> Backup Lamp Applique Replacement (Acadia) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2016 GMC Acadia, 2016 Chevrolet Traverse, and 2016 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Backup Lamp Applique
    GM2889642Courtesy of GENERAL MOTORS COMPANY
  1. Position the backup lamp seal (2) to the backup lamp applique (2).
  2. Insert the backup lamp applique into in the filler panel outer liftgate.
    3. Fig 2: Backup Lamp Applique Nuts
    GM3350748Courtesy of GENERAL MOTORS COMPANY
    CAUTION:

    Refer to Fastener Caution .

  3. Install the nuts (1).
    4. Fig 3: Body Rear Mount Bracket
    GM3350745Courtesy of GENERAL MOTORS COMPANY
  4. Position the body rear mount (2) onto the backup lamp applique.
  5. Install the screws (1).
  6. Connect the backup lamp electrical connector.
  7. Install the interior liftgate trim panel. Refer to Liftgate Trim Panel Replacement (Acadia) .
scientia non olet · About LEMON Manuals