Turn Signal Switch Bracket Replacement

WARNING: This page is about a different car, the 2016 GMC Acadia, 2016 Chevrolet Traverse, and 2016 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Turn Signal Switch Bracket

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Remove the inflatable restraint steering wheel module coil. Refer to Steering Wheel Airbag Coil Replacement .
1	Turn Signal Switch Bracket Bolt (Qty: 2) CAUTION: Refer to Fastener Caution . Tighten 9 N.m (80 lb in)
2	Turn Signal Switch Bracket Procedure Disconnect any electrical connectors as needed. Release the plastic retaining tabs to release the turn signal switch bracket from the steering column.

Callout

Component Name

Preliminary Procedure
Remove the inflatable restraint steering wheel module coil. Refer to Steering Wheel Airbag Coil Replacement .

Turn Signal Switch Bracket Bolt (Qty: 2)

CAUTION:

Refer to Fastener Caution .

Tighten
9 N.m (80 lb in)

Turn Signal Switch Bracket

Procedure

Disconnect any electrical connectors as needed.
Release the plastic retaining tabs to release the turn signal switch bracket from the steering column.