LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2010 >> Traverse LT, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 440 (Steering Wheel And Steering Column) >> Diagnostic Information and Procedures >> Heated Steering Wheel Indicator Malfunction >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2016 GMC Acadia, 2016 Chevrolet Traverse, and 2016 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition ON.
  2. Verify the S70L Steering Wheel Controls Switch - Left is OFF. The steering wheel heater indicator should not be illuminated and the left and right sides of the steering wheel should not be warm.
    • The steering wheel is always warm 

      Refer to Heated Steering Wheel Malfunction 

    • The steering wheel does not become warm and the heater indicator is illuminated 

      Refer to Circuit/System Testing

    • The steering wheel does not become warm and the heater indicator is not illuminated 
  3. Press and release the S70L Steering Wheel Controls Switch - Left. The steering wheel heater indicator should illuminate and the left and right sides of the steering wheel should become warm.
    • The steering wheel does not become warm 

      Refer to Heated Steering Wheel Malfunction 

    • The steering wheel becomes warm and the heater indicator does not illuminate 

      Refer to Circuit/System Testing

    • The steering wheel becomes warm and the heater indicator illuminates 
  4. All OK.